The 4000 Series is aimed at laboratories, manufacturers and design facilities requiring a wide range of outputs with accuracies up to 8ppm.
The 4000 Series builds on the trusted reliability of the 3000A series, offering an updated user interface accessed through a large 7″ capacitive touch screen to enable advanced functionality including a built in procedure mode and inbuilt connection prompts to minimize errors. Procedures can be loaded into the 4000 Series via USB memory stick, with results stored for integration back into ProCal software. The 4000 Series also provides USB printer connectivity as standard, supporting a wide range of PCL compatible printers. Reports can be printed directly from the calibrator – ideal for in-situ or on-site applications.
Expanding the outputs offered by the 3000A series, the 4000 series provides an advanced oscilloscope calibration option with bandwidth calibration of up to 6 GHz with variable level. This expands the calibration workload to include spectrum analysers and high bandwidth oscilloscopes.
To maintain confidence in your equipment, simply connect an 8000 series digital multimeter to the rear of the unit and enter ‘self calibration mode’. The 4000 series will then proceed to measure its outputs automatically and generate a test report which can be exported to a USB memory stick for analysis on a computer, and print a test report via a USB printer for maintaining records.
The 4000 Series implements touch screen technology to provide easier function control and management. The integration of conventional keypad controls coupled with a responsive touch screen offers an intuitive and feature rich interface.
The on screen controls bring an extra dimension of dynamic control not previously possible with keyboard based instruments, for example power calibration where configuration of all parameters and custom user waveforms would traditionally require multiple menus.
In additional, the high resolution LCD display can be used to display detailed connection diagrams avoiding the need to refer to printed documentation for function operation. This functionality provides the 4000 Series with built-in tools for operator training and reduces engineer learning curves not only in calibrator operation but for the total calibration process.
As with all Transmille products, compatibility with ProCal calibration software is guaranteed, existing procedures will not need to be re-written due to Transmilles unique implementation of flexible standards support where procedures are written around the UUT not the standard.
Not sure what calibrator is right for you? Check out our workload chart,or give us a call (802) 846 7582, we are always here to help.
|DC Voltage||0 to 1025V||10nV||8ppm|
|KV amplifier||1 to 10kV||10mV||0.5%|
|DC Current||0 to 30A||10pA||50ppm|
|pA Adaptor||0 to 100uA||0.1pA||200ppm|
|Amplifier (EA3024)||10 to 100A||100uA||0.08%|
|AC Voltage||0 to 1020V||100nV||150ppm|
|10Hz to 500kHz|
|DC Voltage||1 to 5kV||10mV||0.8%|
|AC Current||0 to 30A||100pA||0.04%|
|10Hz to 10kHz|
|10 to 70A||100uA||0.08%|
|Resistance (Passive)||0 to 1GOhm||–||8ppm|
|Resistance (Simulated)||10 to 10MOhm||100ppm||0.01%|
|Capacitance||1nF to 10uF||–||0.25%|
|Inductance||1mH to 10H||–||0.50%|
|Frequency||1Hz to 10MHz||–||20ppm/1ppm|
|Pulse Width / Duty Cycle||10 to 90%||–||1ppm|
|Thermocouple Simulation (EA001)
PRT/RTD (OPTION PRT) (3041/3010)
|Types: J, K, T, R, S, B, N, E • Accuracy 0.05°C • CJC: Auto & Manual – Accuracy 0.1°C • Connection Neutral (Copper) Thermocouple Plug
Range: -100°C to 800 °C • Accuracy 0.01%
|Oscilloscope Calibration (SCP250/SCP350/SCP600)|
Leveled Frequency Sweep
|Range: 2mV/Div (12mV Pk-Pk) to 50V/Div (300V Pk-Pk) • 1kHz Square Wave or DC • Accuracy 0.01% ± 20uV
Range: 5s to 2ns (Option SCP600)
• 5s to 5ns (Option SCP350/SCP250) • Accuracy 5ppm
Range: 50kHz, 5MHz to 250/350/600MHz (dependant on option installed) • Level : 600mV Pk-Pk into 50 Ohms • Accuracy 0.5dbm
Dedicated BNC trigger output for timing & amplitude waveforms
|Power Calibration (PWR50/PWRSINE/PWRDDS)|
Phase / Frequency Range
|Power Direct / 50 Turn Coil: 20.8kW / 1.04MW (3050): 30.7kW / 1.53MW (3041/3010) • Accuracy 0.05% ± 3.5mW/Volt
Range: 0 to 359.9° • Resolution 0.1° • Accuracy 0.1° • Frequency Range: 10Hz to 1kHz
Power Direct / 50 Turn Coil: 30.7kW / 1.53MW (3041/3010)
• Accuracy 0.04% ± 3.5mW/Volt
|Optical Tachometer Calibration (3041/3010)|
|Optical Tachometer Adapter (EA003)||Range: 60RPM to 60,000RPM • Accuracy 50ppm|
|Power Supply Calibration (3041/3010)|
|PSU Calibration Adapter EA3023 (EA3025)||Voltage Measurement 0 to 63V (100V) • Current Load 0 to 3A (60A)|
|Pressure Calibration (3041/3010)|
|Pressure Calibration Modules (TPA001 to TPA018)||Range: 25mBar to 700Bar (10,000PSI) • Accuracy From 0.04%|
|Torque Calibration (3041/3010)|
|Torque Calibration Adapter (EA014)||Range: 0 to 20Nm : Accuracy 0.2%|
|pA / High Resistance Calibration (3041/3010)|
|pA / High Resistance Measurement Adapter (EA008)
pA Source Adapter (EA013)
|5 Ranges: 10nA to 100uA • Resolution 1pA • Accuracy 0.02% ± 3 Counts
5 Ranges: 10nA to 100uA • Resolution 1pA • Accuracy 0.02% ± 3 Counts
|Clamp & Power Meter Calibration|
|2/10/50 Turn Clamp Coil (EA002)||3 Coils: 2 • 10 • 50 Turn : Magnetically Balanced Design: 10mm (2/10 Turn) 25mm (50 Turn) Internal Dimensions: Accuracy: 0.24%|
|Multi Function Workstation (EA015) (3041/3010)|
|Insulation Tester Calibration – Insulation Resistance
Process Control Calibrators
Voltage, Current & Temperature Source
Clamp Meter / Temperature / Optical Tachometer
|Range: 0 to 2GOhms • Resolution 10kOhm • Max. 1000V • Accuracy 0.2% to 5MOhm, 3% above
Ranges: 1.9, 10, 19, 100, 190, 1kOhms
• Accuracy 0.2% ± 50mOhms
Ranges: 50V, 100V, 250V, 500V, 1kV @ 1mA Load • Accuracy 0.5% ± 2 CountsRanges(Resolution): 100mV(1uV), 1V(10uV), 10V(100uV) • Accuracy 0.02% ± 2 Digits
Ranges: 30mA • Accuracy 0.03% ± 2 Digits
See Calibrator Specifications
See Clamp Coil / Thermocouple / Tacho Adapter Specifications
350 / 600 MHz OSCILLOSCOPE
AC SINE / DC POWER
DIRECT DIGITAL SYNTHESIS POWER
SIMULATED RES / CAP
1ppm HIGH STABILITY
THERMOCOUPLE SIMULATION & MEASUREMENT
2 / 10 / 50 TURN CLAMP COIL ADAPTERS
(30A & 40A MODELS)
OPTICAL TACHOMETER ADAPTER
pA / HIGH RESISTANCE MEASUREMENT ADAPTER
TORQUE MEASUREMENT ADAPTER
TORQUE MEASUREMENT ADAPTER
MULTI FUNCTION WORKSTATION
HUMIDITY & TEMPERATURE MEASUREMENT
4 CHANNEL SCOPE TEST HEAD
100A DC / 70A AC TRANSCONDUCTANCE AMPLIFIER
3A / 63V POWER SUPPLY CALIBRATION ADAPTER
10kV DC / 5kV AC KILOVOLT AMPLIFIER
60A / 100V POWER SUPPLY CALIBRATION ADAPTER
PRESSURE MEASUREMENT ADAPTERS
SOFT CARRY CASE OPTION
HARD TRANSIT CASE OPTION
PRECISION ANALOGUE LEAD SET
RS232 TO USB INTERFACE LEAD
RACK MOUNT OPTION
Three options are available for the 3000 Series calibrators which are suitable for calibration of both analogue and digital storage oscilloscopes :
All options provide the calibration waveforms required for amplitude, timebase and bandwidth including gain and linearity of the horizontal and vertical deflection
circuits. To minimise lead changing, the oscilloscope signals are output from a single BNC connector – for automated calibration and optional 4-channel test head adapter is available.
The AC Sine / DC power calibration option provides cost effective calibration of power (Watts) and VA ranges on power meters and clamp meters. The power option provides both voltage and current outputs simultaneously (phantom load) with an adjustable phase relationship.
Any voltage up to 1025V can be set using the normal output ranges and specifications of the calibrator. Currents up to 30A are available from the output of the calibrator without the need for an external amplifier.
The power function is very easy to use – select ‘power’ from the soft key menu, connect the power meter to both the voltage and current terminals and enter the voltage, current and frequency. Phase angle can be adjusted using the softkeys with a resolution of 0.1°. Power output is automatically calculated and displayed in kW.
The Direct Digital Synthesis (DDS) power option for the 3041 and 3010 calibrators extends the AC Sine / DC power function to provide generation of waveforms with harmonic content for calibrating power meters with power harmonics functions. This includes a set of five fixed waveforms, plus the ability to upload user defined waveforms from a PC allowing waveforms with custom harmonic content to be generated.
For dependable readings regardless of the measurement technique and the ultimate in performance, the 3000 series uses precision passive resistors and capacitors, with calibrated values for both 2 and 4 wire connections. Using passive standards also allows confident calibration of AC bridges and removes any difficulty with traceability.
For the 3010 and 3041 a simulated option is available for resistance values between cardinal points providing a continuous range from 10 Ohms to 10 MOhms, with decade capacitance points up to 10 mF.
By incorporating this useful option, the workload of the 3000 Series calibrators can be increased to support calibration of RLC (REsistance / Capacitance / Inductance) meters and bridges and also allows calibration of DMMs with inductance measurement ranges.
Incorporating 8 fixed values, including 19mH and 29mH values for ‘3’ range meters this option allows testing of these types of meters at points which can verify their linearity at near full scale points.
The RTD/PRT option makes calibration of high accuracy resistance thermometers easy. Simply connect in place of the probe and compare the displayed value with the 3000 Series calibrator. As the calibrator used passive precision resistors, reliable readings are guaranteed regardless of the measurement technique used by the thermometer.
Ideal for supporting the calibration of frequency counters / meters, the high stability crystal option provides improved accuracy to 1ppm.
A superior thermocouple simulation and Measurement option, using an external adapter. Temperature gradients / thermal EMFs which can be introduced by internally mounted thermocouple
simulation methods are one of the greatest sources of error with thermocouple temperature calibration.
For the ultimate in accuracy, Transmille has designed a dedicated external adapter. This keeps the electronics required to generate the low level signals as close as possible to the measuring input of the thermometer. This also allows the signal to be as free as possible from electrical noise, and also eliminates errors caused by heat generated by surrounding electronics in the calibrator.
Special care has been taken over the cold junction compensation – a common source of errors in thermocouple calibration. the cold junction compensation (CJC) sensor is mounted in the thermocouple plug itself. By measuring the cold junction at the instruments input allows any type of thermocouple to be simulated without using compensation cables.
Designed for the calibration of both wound AC and magnetic field hall effect AC/DC clamp meters the Transmille current coil offers several unique features built in a robust construction, complete with alignment table for ease of use.
Three coils in one provide the ability to calibrate a wide range of coils, from small lower clamps down to 10mm jaw diameter to larger current clamps.
Using a high intensity LED light source, optical tachometers can be calibrated quickly and easily. Simply enter the RPM value using the calibrator keypad or use ProCal software for automated calibration.
The high resistance / pA measurement adapter eliminates the need for a separate electrometer instrument. The low cost EA008 provides 5 current measurement ranges down to 10nA with a resolution of 1pA and incorporates a ‘virtual ground’ input., avoiding errors due to input impedance.
Provide accurate calibration of sensitive electrometers and low level pico amp meters safely and quickly with this purpose designed option.
A unique and ingenious circuit designed to convert the accurate voltage output from the calibrator into low noise precision current without the use of destructive high voltages and unstable high resistors often used.
By connecting a torque calibration adapter to the 3000 Series calibrator, torque calibration can be performed. Housing an external torque transducer allow torque screwdrivers up to 20Nm to be calibrated.
The multi function workstation adapter provides a central work area with all the connections routed conveniently to remote terminals mounted at the front of the adapter. The adapter extends the functionality of the calibrator to include:
Ideal for monitoring laboratory environment the EA016 incorporates temperature and humidity sensors.
For automation of oscilloscope calibration, a 4 channel switching test head is available. Connect to the 3000 series adapter interface and select the channel required. For accurate calibration of 50 Ohm input oscilloscopes up to 1V/Div a low impedance buffered amplitude output can be selected.
The EA3012 is a powerful linear transconductance amplifier designed exclusively for use with the 3000 Series calibrators which provides a cost effective solution to calibrating high current instruments.
Connecting to the 3000 Series adapter interface, the EA3013 extends the output current range to 100A DC / 75A AC – higher currents are available by paralleling EA3012 amplifiers as required to give the current output needed.
An essential option for simplifying calibration of power supplies, the EA3023 can measure the output voltage and also provide an electronic current load allowing voltage, current and even output resistance to be calibrated using a single compact adapter.
Connecting to the 3000 Series adapter interface, the EA3023 is controlled using either ProCal or the supplied Virtual Front Panel software.
The EA3024 kilovolt amplifier provides the solution to the calibration of high voltage probes and dividers. the amplifier/calibrator combination is used with Virtual Front Panel software to control outputs up to 10kV DC and 5kV AC.
The EA3035 provides an easy to use solution for the calibration of high current power supplies, overcoming many of the problems normally associated with measuring high current outputs.
Key Advantages :
The 3000 Series supports pressure calibration using a range of pressure modules which connect directly to the calibrator. The pressure modules cover a wide range – an optional hand pressure pump is available as an option to generate pneumatic pressure up to 60Bar and vacuum to -0.95Bar.
Designed for carrying the 3000 Series calibrators when working on-site, the soft carry case includes side pockets, a large top pocket and carry strap. The lightweight construction of the calibrator allows easy carrying of the unit.
Designed for transporting the 3000 Series calibrators this rugged transit case is suitable for shipping the 300 Series as well as protecting the calibrators in particularly harsh environments such as oil rigs. The hard wearing design includes extra corner protection.
A comprehensive set of test leads and adapters is provided in this option lead set to cover requirements from low level DC through to high current and high resistance measurements.
The leads and materials supplied in this measurement set have been carefully selected to minimise connection / lead errors. The safety of the lead set is ensured by the use of non-retractable shrouded connectors for the voltage lead set.
An integrated test lead, allowing direct connection from the RS232 interface on the 3000 Series to the USB interface on a PC Computer.
An internal option to provide a dedicated GPIB interface on the 3000 Series calibrators.